PlaneWave Logo White
0
0 Items Selected

No products in the Quote.

a
M
M
0
0 Items Selected

No products in the Quote.

Cdk20 F7.77 Lens Group Png E1614983051338.png

CDK20 F/7.77 Lens Group (Converts CDK20 F/6.8 model to F/7.77)

SKU: 2002010 Categories: , Tags: , ,

$1,400.00

This is lens group is designed to convert a CDK20 f/6.8 to f/7.77. The original lens group is unscrewed from the backplate of the optical tube and replaced with the new lens group.

  • Adds 1.79″ of backfocus to the optical tube for those requiring additional imaging train components.
  • Increases focal length to 3951mm, which is an additional 497 mm of focal length compared to the standard CDK20 f/6.8.

Related products

ImageNameSummaryPriceBuy
Efa Kit E1605039620228.jpg
Electronic Focus Accessory (EFA) Kit
  • The EFA kit automates focusing on the optional Hedrick Focuser, or IRF90 rotating focuser.
  • Monitors temperature (primary-mirror and OTA back-plate).
  • Controls the fans built-in to CDK telescopes.
  • Ensure you have the proper EFA kit selected for your telescope below.
    • 125901-Kit is for CDK12.5 OTAs.
    • 240901-Kit is for CDK14, CDK17, CDK20, and CDK24 OTAs.
$920.00 – $1,150.00
125150 Counterweight Set 450x300 1.jpg
Counterweight Accessory for CDK12.5

Counterweight kit for CDK12.5 attaches to the dovetail bar for critical balance in Declination.

$290.00
600560 Wedge Front Web1 1.jpg
L-500/L-600 Equatorial Wedge
  • Add to the versatility of your L500/600 Direct Drive Mount with PlaneWave’s Equatorial Wedge for precise polar alignment and tracking accuracy.
  • Each wedge is made for your specific latitude and has an alignment range of +/- 3 degrees.
  • Uses oversized fine thread adjustment screws and brass tightening nuts for fine latitude adjustment.
  • Weighs 145lbs fully assembled
$3,500.00
125360.jpg
Mounting Bracket for Finderscopes
  • This is an L-shaped bracket that attaches in four different places on the back of any of the CDK models.
  • This is used to mount a finderscope or some other accessory.
  • Two 1/4-20 screws provided attach the bracket to the backplate of the telescope and two 10-32 threaded holes spaced at 1.450″ can be used to mount accessories too.
$50.00