PlaneWave Logo White
0
0 Items Selected

No products in the Quote.

a
M
M
0
0 Items Selected

No products in the Quote.

Planewave Logo Stacked White

Counterweight for 1.5″ Shaft

SKU: N/A Categories: ,

$290.00 – $500.00

Related products

ImageNameSummaryPriceBuy
170990 1.jpg
Piggyback Dovetail Bars
  • Piggyback dovetails for mounting accessories atop an optical tube. These dovetails accept Losmandy D-style accessories.
  • Piggyback Dovetail Assemblies come with mounting brackets and a Losmandy style dovetail for mounting accessories on your CDK14, 17, 20, 24, and 700.

Please Note- For CDK17 users:

  • 170990 – is for the current CDK17 design with 10.24” of backfocus
$400.00 – $650.00
Hedrick Focuser 384x300 New.png
Hedrick Focuser
  • The Hedrick focuser designed by PlaneWave is a heavy duty no-slip focuser capable of handling an imaging payload of up to 20lbs.
  • Occupies 3″ of backfocus with the focuser fully racked in, and 4.2″ when fully racked out.
  • Focuser travel range of 30mm (30000 microns/1.2″)
  • The focus tube runs on 5 bearings and is driven by a leadscrew so there is no chance of slipping.
  • Focus may be automated through a computer using PlaneWave’s EFA Kit and PWI3 software.
  • The focuser comes with pre-installed motor that can be controlled with the EFA hand controller or PWI3 software.
$1,150.00
600565 Equatorial Wedge L350 Mount.jpg
L-350 Equatorial Wedge

Add to the versatility of your L-350 direct drive mount with PlaneWave’s L-350 equatorial Wedge for precise polar alignment and tracking accuracy.  Each wedge is made for your specific latitude and has an alignment range of ±3 degrees.  Uses oversized fine thread adjustment screws and brass tightening nuts for a fine latitude adjustment.

$2,000.00
125360.jpg
Mounting Bracket for Finderscopes
  • This is an L-shaped bracket that attaches in four different places on the back of any of the CDK models.
  • This is used to mount a finderscope or some other accessory.
  • Two 1/4-20 screws provided attach the bracket to the backplate of the telescope and two 10-32 threaded holes spaced at 1.450″ can be used to mount accessories too.
$50.00