PlaneWave Logo White
0
0 Items Selected

No products in the Quote.

a
M
M
0
0 Items Selected

No products in the Quote.

600180 Irf90.jpg

IRF90 – Integrated Rotating Focuser

SKU: 600180 Categories: , Tags: , , , , , , , , , , ,

$5,200.00

  • The IRF90 is a large capacity Integrated Focuser and Rotator for use with Alt/Az, or equatorially mounted systems.
  • Occupies 3.5″ of backfocus with the focuser fully racked in, and 4.7″ when fully racked out.
  • The Focuser is capable of lifting 40 lbs (18 kg) with a range of 30mm (30000 microns/1.2″).
  • The Rotator has a 90mm aperture with a range of 365 degrees with hardstops to eliminate any chance of cord wrap.
  • IRF90 is controlled via PWI3 software for autofocusing and optional field de-rotation (if using an Alt/Az mounted system).

Related products

ImageNameSummaryPriceBuy
Efa Kit E1605039620228.jpg
Electronic Focus Accessory (EFA) Kit
  • The EFA kit automates focusing on the optional Hedrick Focuser, or IRF90 rotating focuser.
  • Monitors temperature (primary-mirror and OTA back-plate).
  • Controls the fans built-in to CDK telescopes.
  • Ensure you have the proper EFA kit selected for your telescope below.
    • 125901-Kit is for CDK12.5 OTAs.
    • 240901-Kit is for CDK14, CDK17, CDK20, and CDK24 OTAs.
$920.00 – $1,150.00
Hedrick Focuser 384x300 New.png
Hedrick Focuser
  • The Hedrick focuser designed by PlaneWave is a heavy duty no-slip focuser capable of handling an imaging payload of up to 20lbs.
  • Occupies 3″ of backfocus with the focuser fully racked in, and 4.2″ when fully racked out.
  • Focuser travel range of 30mm (30000 microns/1.2″)
  • The focus tube runs on 5 bearings and is driven by a leadscrew so there is no chance of slipping.
  • Focus may be automated through a computer using PlaneWave’s EFA Kit and PWI3 software.
  • The focuser comes with pre-installed motor that can be controlled with the EFA hand controller or PWI3 software.
$1,150.00
Bad Vario.jpg
Finderscope and Mounting Bracket

The back plate on all of the CDK models has four mounting positions for a finder mounting plate.

  • The finder mounting plate attaches to the back plate of the telescope and the quick-release finder bracket attaches to the mounting plate.
  • If the telescope is used on a German Equatorial mount it may be convenient to purchase two finder scopes, one for the east and one for the west side of the telescope.
  • The finder scope is a Baader 10×60 Varios with mounting rings and L- bracket.
$460.00
600335.jpg
SBIG STX/STL Nose Piece AdapterAttaches to the nose piece of the SBIG STX and STL cameras.$180.00